One of the First F-Wave XTD Shingle Installs in the Country
A Luxury Mountain Roofing Case Study
When a homeowner approached Bumble Roofing requesting a specific shingle that wasn't even in full production yet, we didn't settle for a substitute. Rather, we made roofing history by pulling off one of the industry's first residential installations of F-Wave XTD shingles on a luxury mountain home in Snowmass Village. None of it went the easy way. But when this homeowner came to us with a special request, we found a way. Here's how the Bumble Roofing team got it done.
Why the Existing Wood Shake Roof Had to Go
The homeowner already knew their roof had problems: it had leaked before. By the time Bumble Roofing got up there for an inspection, the wood shakes were cracked, loose, and starting to curl. The copper gutters below were leaking at the seams with hangers that had given up years ago. A wood shake roof also carries a different kind of risk in a mountain community like Snowmass Village. Wildfires are a real consideration at high elevation, and the aging wood shake roof no longer aligned with the fire-safety expectations of a modern mountain roofing system. This was the chance to fix that.
Why We Chose F-Wave XTD Synthetic Shingles
The homeowner wanted something that looked like it belonged on a luxury mountain home without paying synthetic-slate prices to get there. F-Wave XTD landed in that sweet spot: durable, fire-safe, impact-resistant, and priced in a way that made sense for the project. Finished in Classic Slate Grey, the shingles read like natural slate from the street, but perform like a modern synthetic product underneath. F-Wave shingles are Class A fire-rated and designed to resist visible surface damage over time. But the biggest difference shows up in how they're installed. The XTD system locks together rather than relying mainly on an adhesive strip, which matters when you're dealing with Colorado's freeze-thaw cycles at 8,000+ feet.
The First of Its Kind: Installing the New F-Wave XTD Product
The only problem with opting for F-Wave XTD shingles? They weren't even fully in production when this job started. Instead of switching products, the homeowner chose to wait, and we supported their decision. Working closely with the manufacturer, Bumble Roofing completed what many recognize as the first residential installation of the new F-Wave XTD system, marking a significant milestone for everyone involved.
Why the Project Took Nine Months, Not Nine Days
When Bumble Roofing inspected and quoted the project in August 2025, winter was already closing in on Aspen and Snowmass. Reroofing in these conditions would have forced us to build a heated enclosure over the entire structure — an expense that didn't make sense for a project that could just as easily wait for spring. So it waited. F-Wave XTD had originally been expected to ship around December; manufacturing pushed that to May 2026 instead. The crew broke ground the moment materials landed, and once they did, the actual work moved fast. Five business days for the full roof, plus a few extra hours the next day to finish the gutters.
Managing Product Delays and Increased Material Costs
Nine months of waiting came with a side effect nobody loves: price increases. Between the original 2025 agreement and delivery in 2026, material costs climbed. Bumble Roofing, supplier ABC Supply, and F-Wave worked out how to absorb that gap rather than passing the full increase on to the homeowner — a feat that is only achieved when the relationships between contractor, supplier, and manufacturer are strong enough to solve a problem together instead of each side protecting its own margin.
Solving Difficult Delivery and Job-Site Access Restrictions
Making deliveries wasn't easy, and for good reason. The Divide subdivision protects its beautiful roads carefully, and every truck needed a verified weight slip before it could pass the gate. This meant that the full material load had to be split across three separate trucks driving up from Colorado Springs. Parking presented its own puzzle. To keep the streets clear, every active work vehicle had to fit inside the homeowner's driveway, with no street parking to fall back on. So we found a solution: crew members parked off-site and got shuttled in each morning. None of this happened by accident. Staging and scheduling were meticulously coordinated well before the first truck ever showed up.
Meeting Strict HOA and Snowmass Village Requirements
The Divide subdivision maintains the highest standards for its private HOA subdivision. Work could only take place from 8 a.m. to 5 p.m., Monday through Friday, with no exceptions. Snowmass Village also required a detailed plan review covering the roofing scope, materials, site logistics, and construction schedule before work could begin.
Bumble Roofing brought in extra crew members to make the most of every approved hour, and since the team was driving in from Colorado Springs, that meant managing hotel stays on top of the work itself.
Five Days, Not Five Weeks: Completing the Roof Within a Restricted Work Schedule
The Bumble Team had fewer working hours than a typical project: no evenings, no weekends. Yet, the roof still had to be weathertight and the job site secured every single night. That's the part that made five business days impressive: not the pace alone, but the pace given the restrictions the crew was working within.
Preserving the Existing Copper Roof
The home's original roof featured high-value copper valleys, wall flashing, and step flashing, all of which remained structurally sound. Ripping it out and replacing it would have been expensive for no real benefit, so the crew worked around it instead: pulling back the surrounding roofing material carefully, inspecting each section, and keeping what still had life left in it.
Working Around Three Chimneys With Integrated Copper Flashing
Three chimneys on this roof had copper flashing built directly into the masonry. Replacing that would have meant tearing into the brick itself, which would have been invasive, disruptive, and unnecessary. The crew worked each transition by hand and sealed the connections with a masonry-grade sealant built to hold up long-term.
Saving the Existing Heat-Tape System
The home already had a heat-tape system for managing snow and ice. It was still fuctional and happened to be grandfathered in under older regulations. New heat-tape installations now come with an added tax, so keeping the existing system made financial and logistical sense. Before demolition started, the crew pulled the system, stored it safely, and carefully reinstalled it once the new roof was down.
Designing a Custom Snow Guard System for an 8/12 Roof
With an 8/12 roof pitch, complex roof geometry, and significant annual snowfall, snow management was an essential part of the roofing design. Rocky Mountain Snow Guards developed a custom layout using the Yeti 6 system based on the roof's pitch and the region's anticipated snow loads. Instead of adding snow guards after installation, we incorporated them into the overall roofing plan, improving the design's snow management capabilities.
Protecting the Home and Landscaping During Construction
Protecting the property was just as important to us as installing the new roof. The homeowner had mature perennials, herbs, and the kind of landscaping that takes years to cultivate. All of this sat directly under a roof that was about to shed a lot of old material. Our crew built temporary wooden structures over the planting beds and wrapped the home's walls and windows in a Catch-All protection system. Staging space was tight, but the job site stayed controlled the entire time with no damage to the home or landscaping.
Protecting the Existing Copper Gutters From Ladder Damage
Copper gutters are soft and dent easily if ladders rest directly against them. The crew used ladder gutter guards to prevent further damage and carefully controlled falling roofing materials to help preserve the home's existing copper gutter system.
Repairing and Reinforcing the Existing Copper Gutters Instead of Replacing Them
The existing copper gutters had dents, bent hangers, and a few active leaks by the time the crew got to them. Instead of a full replacement, we straightened the damaged sections, sealed the leaking seams, and installed new copper-compatible hangers where the old ones had failed. In the end, the homeowner enjoyed better drainage, longer service life, and a much smaller bill than if we'd started from scratch.
What Was Hiding Under the Roof Shake
Tear-off uncovered something the initial inspection couldn't see: rotten sheathing underneath the old roof. Covering that up would have set the new roof up to fail early. Instead, the crew pulled the compromised decking, installed new sheathing, and gave the F-Wave shingles a stable base to go down on. It was the kind of fix that doesn't show up in photos, but will help the roof last longer and perform stronger.
The Final Result
The completed project transformed an aging wood shake roof into a modern roofing system designed for Colorado's demanding mountain climate. By the time the crew packed up, our team had:
All of this was completed in just five business days, even in the face of strict HOA rules, challenging logistics, limited work hours, and product delays.
What the Homeowner Had to Say
The homeowner was out of state for the entire build, so Bumble Roofing sent photos and updates at every step so he could follow the project with peace of mind. What stuck with him most was the pace: a similar project nearby had dragged on for three months. His was done in less than a week.
What This Snowmass Village Project Proves
A mountain roof replacement is never just about shingle choice. Fire resistance, snow load, pitch, drainage, flashing, and winter timing all factor in. Plus, HOA rules and municipal review can reshape the entire schedule before a single nail goes in. This Snowmass Village project showcases how Bumble Roofing rises to these challenges.
Our Colorado Springs team became one of the first crews in the country to install Class A fire-rated F-Wave XTD shingles. But we also saved the original copper instead of replacing it. We put the existing heat tape back rather than pushing the homeowner to buy new. And we accomplished an impressive five-day install squeezed into a restrictive work window most contractors wouldn’t take on.
If you’re considering F-Wave shingles or exploring your options for a new roof or gutter installation, schedule a consultation with us. We’ll apply the same care and expertise demonstrated in Snowmass Village and recommend a long-lasting roofing solution.